Shut Down Ruptures and Overflows With Hunter Flow-Clik Before They Damage Your Landscape

The installation of Hunter’s new Flow-Clik will ensure that a break in your irrigation system will be shut down before any damage can occur. The Flow-Clik is user-set to activate at a specified level of flow; once that level is exceeded, the electrical circuit is broken and the master valve and zone valve(s) are shut off. As a result, the amount of water loss in the event of high external leakage is substantially reduced.

If a main or lateral line ruptures, or if sprinkler heads were broken or removed, and such problems went undetected, it could result in substantial landscape damage. Plants and groundcover can be flooded, a slope can be eroded, even sidewalks or driveways can be undercut. And this type of damage can occur just as easily on a simple residential system as on a top-of-the-line commercial system with institutional-grade components.

To monitor and shut off the flow of any system – large or small, existing or new – and have insurance against damage and potential liability issues, there’s no better low cost solution. Flow-Clik can be wired to any standard 24 volt system and this “catastrophic” protection can be added for a minimal cost.