New Test Program on ICC, Pro-C Controller

All Hunter Pro-C and ICC controllers that have been manufactured in 2002 now feature a test program that allows the contractor to run through each station on a controller for a specific amount of time.

To access the program, simply press the PRG button for two seconds. The display will show station 1 with a run time flashing. The user should then use the plus key to enter a value from 1 to 15 minutes. Once the buttons have been pressed, the controller will run through all stations consecutively for the amount of time that has been entered.

This simple test program is a great way to perform a system check when there is no remote control installed.

The Hunter SRC controller also features a test program, which can be found by accessing the “C” program. Providing a run time of two minutes per station, this test program provides a quick and easy sprinkler that offers enough time to inspect all components in the irrigation system.