Pro-C Test Program Now Simplified, Easier to Use

Responding to our customers’ requests, Hunter has simplified the method for running a test program on the Pro-C controller.

The Pro-C test program operates each station in numerical sequence, from the lowest to the highest. You can start with any station and set the run time of your choice that will work for all of the stations you test. Quick and easy, you’ll find this is a great feature for checking the operation of your irrigation system.

The test program is ideal for contractors to perform a walk-through with their customers when explaining a newly installed system for the first time. And because the need to go back and forth to the controller is eliminated, it also makes servicing and spring start-ups easier.

To initiate the test program:

1. Press and hold the button. The station number will be flashing.
2. Press the or button to scroll to the station you would like to test program to start with. Use the and button to set a run time of up to 15 minutes. The run time needs to be entered only once.
3. After a 2 second pause, the test program will begin.